Analysis of Charging Systems for Electric Vehicle

Ahmet Kilic

Abstract


The charging system plays a key factor for the financial breakthrough of electromobility and customer acceptance with charging performance, charging duration, availability, convenience. In the state of the art, there are three major charging systems (conductive, inductive and automated). In recent years, there are always new requirements from laws, standards and norms for charging systems. These requirements are important and critical for the use and further development of the charging systems. With this work three charging systems (conductive, inductive and automated) are analyzed, evaluated and the requirements from current norms, standard and laws summarized as well as recommendations given. Here the regulation of the maximum possible charging power of the battery for a charging process is presented and the charging power and efficiency between the conductive and inductive charging systems are compared. All three charging systems are compared in terms of performance, cost, convenience. Automated charging system brings more opportunity for the future in terms of significant improvement of customer acceptance (comfortable and fast charging).


Keywords


Battrey, Charging, Conductive Charging, Inductive Charging, Automated chargin, Charging Technologies, Electric Vehicle

Full Text:

PDF

References


References

Ladereport in 2020. Entwicklung der öffentlich zugänglichen Ladeinfrastruktur

für die Elektromobilität sowie Vergleich der Ladetarife in

Deutschland. Link: https://www.prognos.com/sites/default/files/2021-01/20200207_prognos_lade-report_2020.pdf. Accessed: July. 12, 2023.

M Winter, Martin, M Kunze, A Lex?Balducci. "Into a future of electromobility." german research 32.3 (2010): 20-24.

M S Mastoi et al. An in-depth analysis of electric vehicle charging station infrastructure, policy implications, and future trends. Energy Reports 8 (2022): 11504-11529.

Bundesministerium für Digitales und Verkehr: Ladeinfrastruktur nach 2025/2030: Szenarien für den Markthochlauf.URL: https://www.now-gmbh.de/wp-content/uploads/2020/11/Studie_Ladeinfrastruktur-nach-2025-2.pdf/. Accessed: July. 12, 2023.

D. P. Birnie, "Solar-to-vehicle (S2V) systems for powering commuters of the future", J. Power Sources, vol. 186, no. 2, pp. 539-542, Jan. 2009.

C. Hamilton, G. Gamboa, J. Elmes, R. Kerley, A. Arias, M. Pepper, et al., "System architecture of a modular direct-DC PV charging station for plug-in electric vehicles", IECON 2010-36th Annual Conference on IEEE Industrial Electronics Society, pp. 2516-2520, 2010.

G. Carli and S. S. Williamson, "Technical Considerations on Power Conversion for Electric and Plug-in Hybrid Electric Vehicle Battery Charging in Photovoltaic Installations", IEEE Trans. Power Electron., vol. 28, no. 12, pp. 5784-5792, Dec. 2013.

G. R. C. Mouli, M. Leendertse, V. Prasanth, P. Bauer, S. Silvester, S. van de Geer, et al., "Economic and CO2 Emission Benefits of a Solar Powered Electric Vehicle Charging Station for Workplaces in the Netherlands", 2016 IEEE Transportation Electrification Conference and Expo (ITEC), pp. 1-7, 2016.

Kilic, Ahmet. "Plug and Charge solutions with vehicle-to-grid communication." Electric Power Components and Systems (2023): 1-29.

Ravi, Sai Sudharshan, and Muhammad Aziz. "Utilization of electric vehicles for vehicle-to-grid services: Progress and perspectives." Energies 15.2 (2022): 589.

Abdullah-Al-Nahid, Syed, et al. "A novel consumer-friendly electric vehicle charging scheme with vehicle to grid provision supported by genetic algorithm based optimization." Journal of Energy Storage 50 (2022): 104655.

Ahmad A (2018) A comprehensive review of wireless charging technologies for electric vehicles. IEEE Trans Transp Electrif 4(1). https://doi.org/10.1109/TTE.2017.2771619

Dai J (2015) A survey of wireless power transfer and a critical comparison of inductive and capacitive coupling for small gap applications. IEEE Trans Power Electr 30(11). https://doi.org/10.1109/TPEL.2015.2415253.

Oumidou, N., Elkhatiri, A., Khalil, S., Labbadi, M., Cherkaoui, M. (2021). Comparison Study of the Resonant Inductive Power Transfer for Recharging Electric Vehicles. In: Motahhir, S., Bossoufi, B. (eds) Digital Technologies and Applications. ICDTA 2021. Lecture Notes in Networks and Systems, vol 211. Springer, Cham. https://doi.org/10.1007/978-3-030-73882-2_141

Mohamed, Ahmed AS, et al. "A comprehensive overview of inductive pad in electric vehicles stationary charging." Applied Energy 262 (2020): 114584. => https://www.sciencedirect.com/science/article/pii/S0306261920300969#f0030

Zheng, Yu, et al. "Electric vehicle battery charging/swap stations in distribution systems: comparison study and optimal planning." IEEE transactions on Power Systems 29.1 (2013): 221-229.

Mahoor, Mohsen, Zohreh S. Hosseini, and Amin Khodaei. "Least-cost operation of a battery swapping station with random customer requests." Energy 172 (2019): 913-921.

Ye, Hanchang, et al. "Optimization of Battery Swap and Energy Storage Integrated Station Considering Life Cycle Benefit and Support Ability to Grid." 2023 8th Asia Conference on Power and Electrical Engineering (ACPEE). IEEE, 2023.

Cui, Dingsong, et al. "Operation optimization approaches of electric vehicle battery swapping and charging station: A literature review." Energy (2022): 126095.

Monteiro, Vítor Duarte Fernandes, et al. "Comparison of charging systems for electric vehicles and their impact on electrical grid." (2012). => https://repositorium.sdum.uminho.pt/handle/1822/20911

M. Yilmaz and P. T. Krein, "Review of Battery Charger Topologies, Charging Power Levels, and Infrastructure for Plug-In Electric and Hybrid Vehicles," in IEEE Transactions on Power Electronics, vol. 28, no. 5, pp. 2151-2169, May 2013, doi: 10.1109/TPEL.2012.2212917. => https://ieeexplore.ieee.org/abstract/document/6280677

Zhu, Juncheng, et al. "Short-term load forecasting for electric vehicle charging stations based on deep learning approaches." Applied sciences 9.9 (2019): 1723. => https://www.mdpi.com/2076-3417/9/9/1723

Y. Deng, Y. Zhang, F. Luo and Y. Mu, "Operational Planning of Centralized Charging Stations Utilizing Second-Life Battery Energy Storage Systems," in IEEE Transactions on Sustainable Energy, vol. 12, no. 1, pp. 387-399, Jan. 2021, doi: 10.1109/TSTE.2020.3001015. => https://ieeexplore.ieee.org/abstract/document/9112697

Mouli, Gautham Ram Chandra, Prasanth Venugopal, and Pavol Bauer. "Future of electric vehicle charging." 2017 International Symposium on Power Electronics (Ee). IEEE, 2017. => https://ieeexplore.ieee.org/abstract/document/8171657

Oumidou, N., Elkhatiri, A., Khalil, S., Labbadi, M., Cherkaoui, M. (2021). Comparison Study of the Resonant Inductive Power Transfer for Recharging Electric Vehicles. In: Motahhir, S., Bossoufi, B. (eds) Digital Technologies and Applications. ICDTA 2021. Lecture Notes in Networks and Systems, vol 211. Springer, Cham. https://doi.org/10.1007/978-3-030-73882-2_141

P Maske, P A Chel, P K Goyal, D G Kaushik. Sustainable Perspective of Electric Vehicles and Its Future Prospect. jsmpm, Dec. 2021; vol. 1, no. 1, pp. 17–32.

S Schaal. Megawatt-Laden für Nutzfahrzeuge: CharIN demonstriert erstmals MCS-Ladevorgang. In: electrive.net. Accessed: July. 13, 2023.

A Rachid et al. "Electric vehicle charging systems: comprehensive review." Energies 16.1 (2022): 255.

IEC 61558-1: Safety of power transformers, power supplies, reactors and similar products – Part 1:General requirements and tests

IEC 62196 Plugs, socket-outlets, vehicle connectors and vehicle inlets –

Conductive charging of electric vehicles

Charging modes.Link: https://deltrixchargers.com/about-emobility/charging-modes/. Accessed: July. 07, 2023.

EV Charging cable. Link: https://www.omgevcable.com/ev-charging-cables/eu-charging-cables.html. Accessed: July. 10, 2023.

VDE-AR-E 2122-4-2. Electric equipment of electric road vehicles – Electric vehicle inductive charging systems – Part 4-2: Low power range. 03.2021.

TÜV-Merkblatt 75. Änderungen an Fahrzeugen gem. §33 KFG.

A Kilic. Device and method for electrically connecting a charging station with a charging socket of a vehicle. Patent DE102014226755A1. 2016-06-23. Link: https://patents.google.com/patent/DE102014226755A1/en?oq=DE102014226755A1

F Sengebusch, A Kilic, A C Kufner. Vorrichtung zur Betriebsmittelzuführung. Patent DE102013225196A1. 2015-06-11. Link: https://patents.google.com/patent/DE102015211997A1/en?oq=DE102015211997+A1

A Kilic. Charging station and method for automatically charging an electrical energy storage means in a vehicle. Patent US20180001777A1. 2018-01-04. Link: https://patents.google.com/patent/US20180001777A1/en?oq=US20180001777A1

Different types of EV Charging Connectors. Link: https://bestchargers.eu/blog/different-types-of-ev-charging-connectors/. Accessed: July. 03, 2023.

A Kilic, A Henkel. Vehicle socket and cooperating plug. Patent DE102015211997 A1. 2016-12-29. Link: https://patents.google.com/patent/DE102015211997A1/en?oq=DE102015211997+A1




DOI (PDF): https://doi.org/10.20508/ijsmartgrid.v7i3.304.g294

Refbacks

  • There are currently no refbacks.


www.ijsmartgrid.com; www.ijsmartgrid.org

ilhcol@gmail.com; ijsmartgrid@nisantasi.edu.tr

Online ISSN: 2602-439X

Publisher: ilhami COLAK (istanbul Nisantasi Univ)

Cited in Google Scholar and CrossRef